Table of Contents
Advertisement
Figure 15. Installing the system feet
Next steps
1. Place the system upright on a flat, stable surface, and rotate the system feet outward.
2. Follow the procedure listed in
System cover
Removing the system cover
Prerequisites
1. Follow the safety guidelines listed in
2.
Remove the front
bezel.
3. Power off the system and any attached peripherals.
4. Disconnect the system from the electrical outlet and peripherals.
5. Place the system on a flat, stable surface.
Steps
1. Use a 1/4-inch flat head or a Phillips 2 screwdriver to turn the lock counterclockwise to the unlock position.
2. Lift the release latch until the system cover slides back.
3. Lift the cover from the system cover.
32
Installing and removing system components
After working inside your
Safety
instructions.
system.
Advertisement
Table of Contents
