Introduction
These instructions contain all the information you need for using the device.
The instructions are aimed at persons mechanically installing the device, connecting it
electrically, configuring the parameters and commissioning it, as well as service and
maintenance engineers.
Note
It is the responsibility of the customer that the instructions and directions provided in the
operating instructions are read, understood, and followed by the relevant personnel before
installing the device.
1.1
Items supplied
SITRANS FVA250 variable area flowmeter
Operating Instructions
Calibration certificate (optional)
Test report 2.2 (optional)
Acceptance test (optional)
Stainless steel TAG plate (optional)
1.2
Scope of delivery
Inspection
1. Check for mechanical damage due to possible improper handling during shipment. All
2. Make sure the scope of delivery and the information on the nameplate correspond to the
SITRANS FVA250
Operating Instructions, 02/2013, A5E03821131-01
claims for damage are to be made promptly to the carrier.
ordering information.
1
5