Configuration Options Of Connections; I/O Ports And Sdo Map; Tab. 23 Supported Ports And Interfaces - Overview; Tab. 24 Sdo Mappings Of The I/O Ports - Jetter JXM-IO-E32 User Manual

Jetter AG

8.1.1 Configuration options of connections

The table below shows an overview of the ports and the respective interfaces:
Ports
AI_1 ... AI_8
DI_1 ... DI_6
AI_PREC_1 ... AI_PREC_2 Current input with 16 bit
AO_1 ... AO_3
Tab. 23: Supported ports and interfaces - Overview
When configuring the outputs, observe the information in chapter

8.1.2 I/O ports and SDO map

Each I/O port is mapped with an SDO index:
I/O port
AI_prec_1 ... AI_prec_2
Tab. 24: SDO mappings of the I/O ports
Use subindex 1 to assign a specific interface to a port
other subindexes to access the parameters, values, and statuses.
INFO
User Manual – JXM-IO-E32
Description
Analog inputs with 12 bit
resolution
Digital inputs
resolution
(0 mA ... 24 mA)
20 mA analog output
AI_1 ... AI_8
DI_1 ... DI_6
AO_1 ... AO_3
Assigning Interfaces
You can only assign an interface in the
start process.
Supported interfaces
AI_VOLTAGE
AI_CURRENT
AI_TEMPERATURE
DI_PNP
DI_PNP
DI_NPN
FI_PNP
FI_NPN
AI_CURRENT
AO_VOLTAGE
AO_CURRENT
Outputs
SDO index
0x2100 ... 0x2107
0x2108 ... 0x210D
0x210E ... 0x210F
0x2110 ... 0x2112
(Overview – I/O interfaces
Pre-Operational
Parameterization | 8
[} 14].
[} 32]). Use the
state during the
31 / 55