Table of Contents
Advertisement
MCF8315 GUI Application
6 MCF8315 GUI Application
The MCF8315EVM includes a USB-UART interface, using a MSP430FR2355 microcontroller, that serves as a
communication bridge between a host PC and the MCF8315 device for configuring various device settings and
reading fault diagnostic information. A MCF8315A GUI is available to interface with and configure the MCF8315
using this communication interface.
Access the
MCF8315A GUI
6.1 Running the GUI
The MCF8315A GUI can be run directly inside a web browser (supported in Google Chrome and Firefox).
Once the GUI is loaded, follow the step-by-step Guided Tuning section of the GUI to configure the device.
6.2 Offline Installer
Alternatively, the MCF8315A GUI can be downloaded and installed offline using the download feature in the TI
Cloud Gallery.
12
MCF8315EVM Evaluation Module
through the TI Cloud Gallery.
Figure 6-1. MCF8315A GUI
Copyright © 2022 Texas Instruments Incorporated
www.ti.com
SLLU362 – DECEMBER 2022
Submit Document Feedback
Advertisement
Table of Contents
