Table of Contents
Advertisement
www.ti.com
3.2.1.3.1 Initial Setup
To set up the GUI the first time, follow these steps:
1. Make sure that the above mentioned driver was installed successfully to verify that everything works properly
and that the GUI can update the EVM firmware, if necessary.
2. With the EVM/TI-SCB Controller unit plugged to the PC, go to the GUI link:
TMAG6180-6181.
3. To launch the GUI from the web browser, click the GUI Composer application to open the GUI Composer
window (see
GUI Composer Application
a. For first-time GUI Composer setup, follow the prompts to download the TI Cloud Agent and browser
extension (see
TI Cloud
4. Optionally, click the
Composer Application
3.2.1.3.2 GUI Operation
To operate the GUI, follow these steps:
1. Connect the EVM to TI-SCB and mount the Roate & Push Module.
SLYU065 – MARCH 2023
Submit Document Feedback
Window).
Figure 3-8. GUI Composer Application Window
Agent). These prompts appear after you close the README.md dialog.
Figure 3-9. TI Cloud Agent
icon in the GUI Composer window to download the GUI for offline use (see
Window).
Copyright © 2023 Texas Instruments Incorporated
https://dev.ti.com/gallery/search/
GUI
TMAG6180-6181 Evaluation Module
Operation
9
Advertisement
Table of Contents
