www.ti.com
4.1.3 GUI Setup and Usage
Access the GUI in either the Google Chrome
dev.ti.com/gallery/info/7472171/TMAG5x73EVM_GUI/ver/2.0.0/
4.1.3.1 Initial Setup
To set up the GUI the first time, follow these steps:
1. Make sure that the previously-mentioned driver was installed successfully to ensure that everything works
properly.
2. Plug the connected EVM and SCB unit to the PC and go to the
3. Click the GUI Composer application window shown in
•
For first-time GUI Composer setup, follow the prompts to download the TI Cloud Agent and browser
extension shown in
4. Click the
icon in the GUI Composer window shown in
SLYU058C – MAY 2021 – REVISED SEPTEMBER 2022
Submit Document Feedback
®
or Firefox
Figure 4-4. GUI Composer Application Window
Figure
4-5. These prompts will appear after you close the README.md dialog.
Figure 4-5. TI Cloud Agent
Copyright © 2022 Texas Instruments Incorporated
®
browser by clicking on the following link:
GUI link
provided earlier.
Figure 4-4
to launch the GUI from the web browser.
Figure 4-4
to download the GUI offline (optional).
EVM Operation
https://
TMAG5x73 Evaluation Modules
9