Hardware Connection; Laptop Connection; Wireless Connection To A Smartphone - Revopoint 3D Technologies POP 2 User Manual

Hide thumbs Also See for POP 2:

Table of Contents

POP 2 3D Scanner User Manual

Hardware Connection

*The display screen resolution recommended is 1920×1080.

For Wi-Fi settings, Host mode is default. In this mode, a smartphone could connect to the Wi-Fi provided by the POP 2 3D

scanner.

The default SSID is: POP2-REVO-XXXXXXXX

The default Password is: Revopoint3d

For example: If the Serial Number of one POP 2 3D scanner is: A21A0005206F00A54.

The Default SSID: POP2-REVO-A21A0005

The Default Password: Revopoint3d

How to revise the SSID and Password:

1. Connect POP 2 3D scanner to a PC via USB cable and Open the Revo Scan;

2. Click About

--Settings;

3. Detete the default SSID and Password to enter the one as you wish.

� For a SSID, enter 1-32 characters;

�

For a Password, enter 8-32 numbers, English letters or punctuation marks in any combination( no space characters).

Make sure the POP 2 scanner is connected to a USB

3.0 or above port, because USB 2.0 will not supply

sufficient operating current. An indicator of this is

repeated power resets and lost connections.

Table of Contents

Do you have a question about the POP 2 and is the answer not in the manual?