Pc: Connect To Pop 2 3D Scanner; Windows: Connect To The Pop 2 3D Scanner Via Usb Cable; Hardware Connection; Operation Workflow - Revopoint 3D Technologies POP 2 Quick Start Manual

Hide thumbs Also See for POP 2:

Table of Contents

POP 2 3D Scanner User Manual

PC: Connect to POP 2 3D Scanner

Both Mac and Windows PC can be connected to POP 2 3D scanner via USB cable and Wi-Fi. In the following chapter, we

are going to introduce the USB mode and Wi-Fi mode connections: for USB mode, we will take the Windows device

connection as the example, and for the Wi-Fi mode, take the Mac device connection as the example.

OVERVIEW (details on following pages): Double Click to open Revo Scan---> Confirm "Device is connected" (displays

after several seconds) ---> Click New Scan to select Accuracy, Scan Mode and Texture ---> Confirm distance to be

"Excellent" ---> Adjust the brightness in RGB camera and Depth Camera (Auto first, if available, then Manual) --->

Start/Pause Scanning ---> Stop to Complete/Restart Scanning ---> Fuse Point Cloud ---> Mesh ---> Texture (only available

for Colorful scans) ---> Export the 3D model

NOTE: The screenshots in this tutorial are from the Windows version of Revo Scan. There will be slight differences in each

of the four device versions.

Make sure the POP 2 scanner is connected to a USB 3.0+

port, because USB 2.0 will not supply sufficient operating

current. An indicator of this is repeated power resets and

lost connections.

Table of Contents

Do you have a question about the POP 2 and is the answer not in the manual?