Troubleshooting - Roberts Stream 94L Manual

Troubleshooting

If you experience any trouble with your radio, then you may find it useful
to visit the help section on our web site.
If you have difficulty connecting the radio to your computer network, some
of these steps may help to resolve the problem:
1. Confirm that a WiFi connected PC can access the Internet (i.e. can
browse the web) using the same network.
2. Check that a DHCP server is available (normally a router function).
Your radio will by default use DHCP unless you choose to disable it.
This may be configured using the menu items 'System Settings' ->
'Network' -> 'Manual settings'. For wireless you then need to choose
'DHCP enable' or 'DHCP disable'. If you enable DHCP then the radio
will negotiate with your router (or DHCP server) and will be provided
with an IP address as well as the other settings needed. If you wish
to set the network configuration manually, refer to paragraph 6.
3. Check that your network's firewall is not blocking any outgoing ports.
As a minimum, the radio needs access to UDP and TCP ports 80 and
123. Some Internet radio services may require additional ports to be
open.
4. Check that your access point does not restrict connections to particular
MAC addresses (sometimes called MAC address filtering).
53
You can view the radio's MAC address using the menu items 'System
Settings' -> 'Network' -> 'View settings' -> 'MAC address'.
The MAC address will typically be of the form
5. If you have an encrypted network, check that you have entered the
correct encryption key into the radio. Remember that text-format WPA
keys are case sensitive. If your radio displays 'Network error' when
attempting to connect to an encrypted network, then please ensure
that you enter the correct key for the network. If the problem persists,
then you may need to re-check your network configuration.
6. If you need to set up your radio's IP address manually, you will need to
know low-level details of your network's configuration. Use the menu
items 'System Settings' -> 'Network' -> 'Manual settings' -> 'Wireless'
(as needed) -> 'DHCP disable'.
The radio will then prompt you in turn for the
IP address
Subnet mask
Gateway address
Primary DNS
Secondary DNS
If you are setting up a wireless connection manually you will also need
to enter the SSID, the encryption type, and the encryption key.
See page 16 for full details on how to set up your radio's network
configuration manually.
60
DAB
00:22:61:xx:xx:xx