Configuration; Plugging In And Language Selection - Roberts Stream 94L Manual

Configuration

Plugging in and language selection

Your radio may be configured using either the display and buttons on the radio, or by
using the UNDOK app.
1. Place your radio on a flat surface and plug the cable from the mains adaptor into the
DC input socket located at the rear of your radio ensuring that the plug is pushed
fully into the socket.
2. Plug the mains adaptor into a wall socket and switch on the socket.
3. IMPORTANT: The mains adaptor is used as the means of connecting the radio to
the mains supply. The mains socket and any multi-way mains block used for the
radio must remain accessible during normal use. In order to disconnect the radio
from the mains, the mains adaptor should be removed from the mains socket outlet
completely.
4. When you apply power, the display on the radio will light up and show a start up
screen for a few seconds. If this is the first time that you use your radio (or after a
Factory Reset) the display will show the language menu. By default your radio will
display all menus and messages in English.
Note: If you wish to use UNDOK to setup your radio, please see page 17.
5 If you would like to setup your radio using the radio's controls instead of the UNDOK
app follow the setup procedure and choose the desired language. Rotate the Tuning
control to highlight the desired language. Press the Tuning control to enter the
selection.
• Your radio will then display a privacy policy. Please read the privacy policy and then
press the Tuning control to accept the policy.
6. The radio will show a setup wizard. With 'YES' highlighted press the Tuning control
to select 'YES' and to begin setting up your radio.
Continue on the next page.
9
60
DAB
Stream 94L
DC In: 12V 2.5A
USB: 5V 500mA
Roberts Radio Ltd, Stoney Lane,
Whiston, Prescot, L35 2XW, UK
Glen Dimplex Europe Ltd, READ
Airport Road, Cloghran, SAFETY GUIDE
Co. Dublin, K67 VE08,Ireland
Designed & Engineered in the UK, Made in China
DC 12V 2.5A
Language
English
Dansk
Nederlands
Français
Deutsch
Italiano
Setup Wizard
Start now?
*