Installation; Thermostat Location - Braeburn Premier Series Installer Manual

2 INSTALLATION

Warning
Disconnect power before beginning installation.

Thermostat Location

Install the thermostat approximately 5 feet (1.5m) above the floor in an area that has a good amount of air
circulation and maintains an average room temperature.
Avoid installation in locations where the thermostat can be affected by drafts, dead air spots, hot or cold air
ducts, sunlight, appliances, concealed pipes, chimneys and outside walls.
Install the Sub-Base:
• Remove the sub-base from the body of the thermostat.
• Mount the sub-base as shown below:
Installer Manual
Drill 3/16" pilot holes in your
desired location. Use supplied
anchors for drywall or plaster.
UP
2
UP