Connector And Indicator Functions; Front Panel - Hall Technologies EMCEE200 User Manual

EMCEE200

3.0 CONNECTOR AND INDICATOR FUNCTIONS

Front Panel

1) WINDOW: Up to four video windows can be processed and output to "CONFIDENCE" and
"PRESENT" outputs. Configurations may be 1 x1, 2 x 1, 1 x 2, 2 x 2, 3 x 1, 1 x 3, or a mirrored "quad
view". These window arrangements may be configured through the MENU, or via the Web GUI.
a. To change the video source for a window, select the corresponding WINDOW button.
b. There is a 5-second timeout to make a selection, during which the selected WINDOW
button wll be blinking.
c. The current INPUT source LED will be lit. Select the new desired input.
d. INPUT LED will blink once to confirm
2) INPUT: EMCEE200 supports up to four HDMI Inputs, at resolutions from 480p up to UHD 4K @
60Hz, 4:4:4. Input selections are changed by first selecting the corresponding WINDOW, and then
the new desired INPUT.
3) PRESETS: Up to four presets can be saved and recalled, to quickly switch between configurations
without having to use the OSD MENU or Web GUI.
a. To SAVE a preset, press and hold the desired PRESET button for three seconds. The LED
will blink once to confirm.
b. To RECALL a preset, press the desired PRESET button. The LED will blink once to confirm.
4) IR WINDOW: IR Receiver window. Ensure this area is not obstructed if using the IR remote.
5) VOLUME: Master volume control for both HDMI outputs and the optional amplified audio output.
Rotate to adjust volume. Press the VOLUME knob to toggle mute/unmute.
8
1 2 3 4 5
© Copyright 2021 Hall Technologies, LLC