Unpacking; Positioning; Mechanical Installation; Floor Mounting - Electrolux T4130 Installation Manual

8

Unpacking

Unpack the dryer from the packaging.
There are no transportation fittings. Release
the dryer from the pallet by cutting the plastic
ribbon.

Positioning

Fig Place the dryer in such a way that work can
be done as easily as possible by the user as
1
well as the service technician. The door is
reversible.
The distance to the wall or other equipment
behind the dryer should be min. 300 mm and
the distance to the sides min. 70 mm (if the
dryer is to be equipped with a coin box the
width of the coin box must also be added).
However, for the purpose of servicing the dryer
there should be free access to the back of it.
The dryer can be positioned on a 55-litre
washing machine to form a washing column.

Mechanical installation

Fig Adjust the dryer to ensure that it is horizontal
and stands firmly on all 4 feet.
2
The max. height adjustment is 14 mm.

Floor mounting

Fig The dryer can be installed directly on the floor
and fastened by means of the accompanying
3
cups A.
Fasten the cups by means of the
screws.
A drilling plan is given in fig. 3
in the form of alternative 1 (from
the rear) or 2 (from the side),
depending on the space for
mounting the rocker brackets B.
Drill the rawlplug holes using a 10
mm drill.
Unpacking
1
2
3
42,5
15,5
Alt. 1
A
47,5
510 42,5
564 15,5
B
Front
500
47,5
Alt. 1
Alt. 2
Alt. 2