Installation manual
10
3 Setup
3.1 Unpacking
Note!
Two persons are recommended for the unpacking.
The machine is delivered complete with supporting feet.
The machine is delivered bolted onto the transport pallet and packed in a crate or box.
Remove packing from the machine.
Remove the bolts between the machine and pallet. There are two bolts in the front of the machine and two in the back
of the machine. Remove the lower front panel and remove the two bolts in the front of the machine. Remove the low-
er rear panel and remove the two bolts in the back of the machine.
fig.X00059
Remove the machine from the pallet.
Note!
When moving the machine, handle it with care. The drum has no transport clamps.
Place the machine on its final position.