Advertisement
A
B
A
C
A
A
B
C
7. Shift Holder
Screw the shift holder into the shift axle (A)
with appropriate depth, and tighten the nut
(B) under on the axle.
8. Front Bumper
Take off the 4 bolts and washers on the
front lower shield (A), and assemble back
with front bumper. For easy assembly,
please fix the lower 2 bolts first, and then
fix the upper bolts.
9. Rear Hand Hold
Take off the bolts (A) of the left and right
side rear bumper brackets (B), and
B
assemble back with the rear hand hold (C),
the hand hold have to be fixed between the
frame and the rear bumper brackets.
10. Rear Carrier
Make the front support tube of the rear
carrier through the 2 holes on the top of
rear vehicle plastic fender. And bolted to
the mounting points of frame (A) and to the
rear hand hold (B). For ease of operation,
seat back cushion (C) and passenger hand
holder (D) can be pre-assembled before the
rear carrier being fitted to the vehicle.
When install the passenger hand holder,
make the high end forward to front to get
better comfort.
D
Caution
15
Hide quick links:
Advertisement
