WARNING: The MCH must be disconnected from electrical power before
inspecting, reprocessing, or preparing the device for use.
CAUTION: Do not use acetone-based cleaning solutions to clean the MCH.
Acetone-based cleaning solutions will cause equipment damage.
CAUTION: Cleaning and disinfection policies and procedures must follow
current FDA and CDC guidance.
After Every Use
Clean all outer surfaces of the MCH, including modules and accessories, to remove any
splattered blood or spilled liquids with EPA-registered tuberculocidal disinfectant wipes. Use
only products and processes that are suitable for plastic surfaces. Avoid excess liquid near the
control panel.
48
MAINTENANCE | After Every Use