Standby
System mode indicator
Current temperature
display
Operational indicators
CPG option controls
Control buttons
In STANDBY mode, the pump and heaters are off, and the operator is able to preset the
desired temperature and other settings in preparation for entering RUN mode.
To set the desired temperature in tenth-degree
increments, touch the
control button. Holding the button for more
than one second will cause the temperature
setting to change more rapidly. Alternatively,
touching the "SET POINT" temperature field will
cause a numeric keypad to appear onscreen,
allowing direct input of the desired temperature.
After entering the desired temperature, touch
the
button to confirm, or touch
cancel.
The temperature setting, temperature presets, and customized message are stored in
non-volatile memory, and will be retained until changed.
or
temperature
to
To modify the customizable message at the top right of
the screen, touch the message field to bring up an
alphanumeric keypad onscreen.
After entering the desired customized message (up to
12 characters; e.g., "CARDIOPLEGIA"), touch the
button to confirm, or touch
Customizable text
Temperature control
buttons
Pump speed control
to cancel.
CONTROL SCREENS | Standby
17