Blanket Hose Connectors - CardioQuip MCH-1000 Operators & Service Manual

Blanket Hose Connectors

The smaller connectors on the MCH-1000(i), directly
below the "Main" connections on the rear panel of the
MCH, are for connections to patient warming blankets.
Maximum water flow at the blanket connectors is
approximately 4 liters/min (1.0 gal/min). Approximate
water flow when connected to a blanket is 1-2 liters/min.
The water at the OUT connector is under pressure when
the system pump is on.
Connecting Blanket Hoses
To connect a hose, firmly push the connector
straight in until it "clicks," as shown.
Disconnecting Blanket Hoses
To remove a hose, grasp the connector and
push the dark grey button on top of the
panel connector, as shown below. The
connector is spring-loaded and will pop out.
28 CONNECTORS, VALVES, & HOSES | Blanket Hose Connectors
Blanket Hose Connectors