Table of Contents
Advertisement
Instrument Operating System
USB Connections
USB Connections
The two USB 3.0 Type A ports are compatible with the USB 2.0/3.0 and 1.1
specification. These ports can be used to connect USB mass storage devices
and printers. The instrument USB Host support includes the standard
Microsoft Windows USB drivers for human interface, mass storage, printing,
scanning, and imaging devices. The USB 3.0 Type C connector is used only for
connection to the Keysight V3080A Frequency Extender. (The V3080A is only
available on the 32 GHz, 44 GHz, and 54 GHz instruments.) A complete
up-to-date list of the Windows USB class driver support is available on the
Microsoft website.
The front panel USB 3.0 Type C connectors do not have USB-compliant pin
configurations. Do not use these ports for any USB devices as damage may
occur.
Figure 3-1
Location of USB Ports
Keysight Technologies does not support or warrant correct instrument
operation if additional USB drivers from third parties are installed in the
instrument. It is possible that additional drivers could break the normal USB
operation. If USB operation is broken, recovery would require reinstalling the
instrument application using the Instrument recovery process.
102
M9484C Startup Guide
Advertisement
Table of Contents
