Welding Transfer Bags To Kit - Thermo Scientific gibco CTS DynaCellect Magnetic Separation System User Manual

6. Transfer beads to the bag via luer-lock. Purge two times with air to minimize loss.

Welding transfer bags to kit

1. Place the Single-Use Kit on one side of the welder and the transfer bags on the other side of the
welder. Place the Single-Use Kit tube in the welder (use tube holder to find correct tube) together
with the bag tube and weld the bags to the Single-Use Kit.
CTS DynaCellect Magnetic Separation System User Guide
™ ™
Chapter 6 Basic instrument operation
Prepare consumables for a run
6
137