Advertisement
Quick Links
PulM Series
For Puzzle-IN005
PulM-100G2SF-E810
w w w. ie iwor ld.com
Package Contents
PulM-100G2SF-E810
Hardware Installation
CPU
One PCIe x8 or
Two PCIe x4
PCIe Con guration
x8
x4
x4
Networking Module Quick Installation Guide
PulM-100G2SF-E810 Block Diagram
PCIe CONF. MODE
PCIe 4.0
A19
A32
LAN LED Status
LAN Port
Speed
LED
A19
A32
PCIe Con g.
0
1
2x4
1
0
1x8
A32
A19
One x8
0
1
Intel® E810
note: two ports are redundancy, only one port can reach 100G
LED
State
Link (Left)
Yellow
Link
Green
LED
Speed (Right)
Orange
Install the IEI PulM-100G2SF-E810 networking
module into the slot of the PUZZLE-IN005. All
slots support 8 lanes of PCIe gen4 signal from
CPU (one PCIe x8 or two PCIe x4).
QSFP28
SFI 100G
QSFP28
Description
Active
100Gbps data rate
other data rate
Advertisement
Related Manuals for IEI Technology PulM Series
Summary of Contents for IEI Technology PulM Series
- Page 1 Networking Module Quick Installation Guide PulM Series For Puzzle-IN005 PulM-100G2SF-E810 w w w. ie iwor ld.com Package Contents PulM-100G2SF-E810 Block Diagram PulM-100G2SF-E810 PCIe CONF. MODE One x8 PCIe 4.0 QSFP28 Intel® E810 SFI 100G QSFP28 note: two ports are redundancy, only one port can reach 100G...
- Page 2 Networking Module Installation Step Loosen the two screws indicated below. Grab the screws and pull the slot cover all the way out to remove it. Step Slide an IEI networking module into the slot until the module is seated in the slot correctly and securely. Fasten the two screws on the networking module to secure the module to the chassis.