IEI Technology PUZZLE-100 User Manual

Desktop network appliance

Advertisement

Quick Links

PUZZLE-100
MODEL:
PUZZLE-100
Desktop Network Appliance with Marvell
®
ARMADA
®
7040
Processor, Five GbE, 2GB DDR4, On-board 4GB eMMC,
USB Type-C Console, and RoHS Compliant
User Manual
Page i
Rev. 1.00 – December 7, 2023

Advertisement

Table of Contents
loading

Summary of Contents for IEI Technology PUZZLE-100

  • Page 1 PUZZLE-100 MODEL: PUZZLE-100 Desktop Network Appliance with Marvell ® ARMADA ® 7040 Processor, Five GbE, 2GB DDR4, On-board 4GB eMMC, USB Type-C Console, and RoHS Compliant User Manual Page i Rev. 1.00 – December 7, 2023...
  • Page 2 PUZZLE-100 Revision Date Version Changes December 7, 2023 1.00 Initial release Page ii...
  • Page 3 PUZZLE-100 Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
  • Page 4 PUZZLE-100 Manual Conventions WARNING Warnings appear where overlooked details may cause damage to the equipment or result in personal injury. Warnings should be taken seriously. CAUTION Cautionary messages should be heeded to help reduce the chance of losing data or damaging the product.
  • Page 5: Table Of Contents

    PUZZLE-100 Table of Contents 1 INTRODUCTION ......................1 1.1 O ........................2 VERVIEW 1.2 F ........................2 EATURES 1.3 F ......................3 RONT ANEL 1.4 R ......................3 ANEL 1.5 T ..................4 ECHNICAL PECIFICATIONS 1.6 D ....................... 6 IMENSIONS 2 UNPACKING .........................
  • Page 6 PUZZLE-100 List of Figures Figure 1-1: PUZZLE-100 Series ..................... 2 Figure 1-2: Front Panel ........................3 Figure 1-3: Rear Panel ........................3 Figure 1-4: Physical Dimensions (millimeters) ................6 Figure 3-1: System Connection ....................12 Figure 3-2: IEI Resource Download Center ................13...
  • Page 7 PUZZLE-100 List of Tables Table 1-1: Technical Specifications ....................5 PUZZLE-100 Page vii...
  • Page 9: Introduction

    PUZZLE-100 Chapter Introduction Page 1...
  • Page 10: Overview

    1.1 Overview Figure 1-1: PUZZLE-100 Series The PUZZLE-100 is a desktop network appliance powered by Marvell® ARMADA® 7040. The integrated GbE ports are ideally suited for a wide range of applications, such as SOHO and SMB networking infrastructure. The PUZZLE-100 supports five GbE ports for high-speed network applications.
  • Page 11: Front Panel

    Power on/off (off: dark; booting: red; ready: blue) Network: Network (defined by users) Information: Information (defined by users) 1.4 Rear Panel An overview of the PUZZLE-100 rear panel is shown in F igure 1-3 below. 6 9 1 H 6 9 1 Figure 1-3: Rear Panel...
  • Page 12: Technical Specifications

    PUZZLE-100 1.5 Technical Specifications The PUZZLE-100 technical specifications are listed in Table 1-1. System ® CPU (SoC) Marvell ARMADA® 7040 (88F7040) quad-core Armv8 Cortex ® -A72 CPU, up to 1.4GHz Memory On-board 2GB DDR4 eMMC 4 GB eMMC 5.1, enterprise grade MLC...
  • Page 13 PUZZLE-100 Environmental and Mechanical Mounting Desktop Temperature Operating: 0C – 40C (32F – 104F) Storage: -10°C – 50°C (14°F – 122°F) Humidity 5% – 90%, non-condensing Certification CE, FCC, VCCI, BSMI Operating System Linux Physical Dimensions 209.9 mm x 151.2 mm x 38.1 mm (W x D x H) Weight 0.6 kg...
  • Page 14: Dimensions

    PUZZLE-100 1.6 Dimensions The physical dimensions are shown below: Figure 1-4: Physical Dimensions (millimeters) Page 6...
  • Page 15: Unpacking

    PUZZLE-100 Chapter Unpacking Page 7...
  • Page 16: Anti-Static Precautions

    PUZZLE-100 and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the PUZZLE-100. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the PUZZLE-100 or any other electrical component is handled, the following anti-static precautions are strictly adhered to.
  • Page 17: Packing List

    If some of the components listed in the checklist below are missing, please do not proceed with the installation. Contact the IEI reseller or vendor you purchased the PUZZLE-100 from or contact an IEI sales representative directly. To contact an IEI sales representative, please send an email to sales@ieiworld.com.
  • Page 18: Installation

    PUZZLE-100 Chapter Installation Page 10...
  • Page 19: Installation Precautions

    Air Circulation: Make sure there is sufficient air circulation when installing the PUZZLE-100. The PUZZLE-100’s cooling vents must not be obstructed by any objects. Blocking the vents can cause overheating of the PUZZLE-100. Leave at least 5 cm of clearance around the PUZZLE-100 to prevent overheating. ...
  • Page 20: Figure 3-1: System Connection

    Red means the device is booting up, and blue means it is ready to use. Step 4: Connect the PUZZLE-100 to the network via the WAN port on the rear panel. Step 5: Connect the PUZZLE-100 to a computer or other network devices.
  • Page 21: Resource Download

    PUZZLE-100 3.3 Resource Download All the resources for the PUZZLE-100 are available on IEI Resource Download Center (https://download.ieiworld.com). Type PUZZLE-100 and press Enter to find all the relevant software, utilities, and documentation. Figure 3-2: IEI Resource Download Center Page 13...
  • Page 22: A Regulatory Compliance

    PUZZLE-100 Appendix Regulatory Compliance Page 14...
  • Page 23 PUZZLE-100 DECLARATION OF CONFORMITY This equipment is in conformity with the following EU directives: EMC Directive (2004/108/EC, 2014/30/EU)  Low-Voltage Directive (2006/95/EC, 2014/35/EU)  RoHS II Directive (2011/65/EU, 2015/863/EU)  Medical Device Directive 93/42/EEC: EN 60601-1  If the user modifies and/or install other devices in the equipment, the CE conformity declaration may no longer apply.
  • Page 24 PUZZLE-100 Italiano [Italian] IEI Integration Corp. dichiara che questo apparecchio è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 2014/53/EU. Latviski [Latvian] IEI Integration Corp. deklarē, ka iekārta atbilst būtiskajām prasībām un citiem ar to saistītajiem noteikumiem Direktīvas 2014/53/EU.
  • Page 25 PUZZLE-100 FCC WARNING This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and  This device must accept any interference received, including interference that ...
  • Page 26: B Safety Precautions

    PUZZLE-100 Appendix Safety Precautions Page 18...
  • Page 27: Safety Precautions

    WARNING: The precautions outlined in this appendix should be strictly followed. Failure to follow these precautions may result in permanent damage to the PUZZLE-100. Please follow the safety precautions outlined in the sections that follow: B.1.1 General Safety Precautions Please ensure the following safety precautions are adhered to at all times.
  • Page 28: Anti-Static Precautions

    Electrostatic discharge (ESD) can cause serious damage to electronic components, including the PUZZLE-100. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the PUZZLE-100 is opened and any of the electrical components are handled, the following anti-static precautions are strictly adhered to.
  • Page 29: Product Disposal

    PUZZLE-100 B.1.3 Product Disposal CAUTION: Risk of explosion if the battery is replaced by an incorrect type; Replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types);...
  • Page 30: Maintenance And Cleaning Precautions

    B.2 Maintenance and Cleaning Precautions When maintaining or cleaning the PUZZLE-100, please follow the guidelines below. B.2.1 Maintenance and Cleaning Prior to cleaning any part or component of the PUZZLE-100, please read the details below.  The interior of the device does not require cleaning. Keep fluids away from the device interior.
  • Page 31: C Hazardous Materials Disclosure

    PUZZLE-100 Appendix Hazardous Materials Disclosure Page 23...
  • Page 32: Rohs Ii Directive (2015/863/Eu)

    PUZZLE-100 C.1 RoHS II Directive (2015/863/EU) The details provided in this appendix are to ensure that the product is compliant with the RoHS II Directive (2015/863/EU). The table below acknowledges the presences of small quantities of certain substances in the product, and is applicable to RoHS II Directive (2015/863/EU).
  • Page 33: China Rohs

    PUZZLE-100 C.2 China RoHS 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签,此期限是估算这些物质”不会有泄漏或突变”的 年限。本产品可能包含有较短的环境友好使用期限的可替换元件,像是电池或灯管,这些 元件将会单独标示出来。 部件名称 有毒有害物质或元素 壳体 显示 印刷电路板 金属螺帽 电缆组装 风扇组装 电力供应组装 电池 O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11364-2014 與 GB/T26572-2011 标准规定的限量要求以下。 X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11364-2014 與 GB/T26572-2011 标准规定的限量要求。 Page 25...

Table of Contents