Microtek ScanMaker i900 Supplementary Manual page 25

5. Optional: If calibration has been
performed, go to the Settings
window in ScanWizard Pro.
Choose the profile you have just
created in the Input Profile /
Scanner Profile menu.
6. Click the Overview button to perform a preliminary scan of your original.
7. Select the Scan Frame tool from the Toolbar in the Preview window, and choose
the area to be scanned by dragging a rectangle around it. You will see a flashing
frame (marquee) around the selected area.
8. Specify your scanning requirements in the Settings window.
a) Select a desired image type.
b) Select a desired resolution.
c) Adjust the scan frame settings if necessary.
9. Adjust image quality if necessary, using the Advanced Image Correction (AIC) tools.
10. If the colors in your photo are
faded and need restoring, check
the "Automatic Color
Restoration" box in the Settings
window.
11. Click the Prescan button to display a detailed image. A thumbnail of the image
appears as well in the Scan Job Queue window.
12. Click the Scan button in the Preview window to start scanning. The Scan
button appears as the "Batch" button when ScanWizard Pro is started in
standalone mode.
• If ScanWizard was launched from an application program, the image is then
delivered to your application, where the image can be saved, printed, or edited.
• If ScanWizard was launched in standalone mode, you will be prompted to after
the button is pressed, such as entering the file name, specifying a folder name
of your own, etc. When you have completed the settings, press the Done/Save
button, and the scanner will automatically scan and save your image based on
your settings.
ScanMaker i900 Supplement 25