Using The Glass Holder - Microtek ScanMaker i900 Supplementary Manual

10 ScanMaker i900 Supplement

Using the Glass Holder

The Glass Holder is used to scan non-standard-size transparencies.
1. Place the film face down on top of the glass surface of the holder.
2. Secure the transparency to the glass by using the vinyl strips provided with
your scanner.
3. Insert the holder all the way into the transparency bay (the drawer or lower
compartment) of the scanner.
Note: The Glass Holder requires regular cleaning. To clean, use mild glass
cleaning solution, and wipe the glass plate gently with lint-free, lens-cleaning
cloth to prevent leaving fiber residue.
Orient Glass Holder with "Glass
Holder" label facing up
Keep calibration strip clear
and free of any obstruction