Using The 4 " X 5 " Film Holder - Microtek ScanMaker i900 Supplementary Manual

D. Using the 4 " x 5 " Film Holder
The 4" x 5" Film Holder can hold two pieces of 4" x 5" film at a time.
1. Place the film into the 4" x 5" Film Holder.
a) Push on the side to open the lid.
b) Place the film in the holder.
c) Pull down the side to close the lid.
a)
2. Put the 4" x 5" Film Holder
into the Main Holder.
3. Insert the whole assembly
into the transparency bay
of the scanner.
b)
c)
Orient Main Holder with "Main
Holder" label facing up
ScanMaker i900 Supplement 15