Microtek ScanMaker i900 Supplementary Manual page 22

22 ScanMaker i900 Supplement
5. Click the Overview button to perform a preliminary scan of the image, which will
appear in the Preview window.
6. Select the Scan Frame tool from the Toolbar in the Preview window, and choose
the area to be scanned by dragging a rectangle around it. You will see a flashing
frame (marquee) around the selected area.
7. Specify your scanning requirements in the Settings window.
a) Select a desired image type.
b) Select a desired resolution. Recommended resolution for DIGITAL ICE is 800
dpi; maximum is 3200 dpi.
c) Adjust the scan frame settings if necessary.
8. Adjust image quality if necessary, using the Advanced Image Correction (AIC) tools.
Important: The Descreen setting in the Settings window should be "None."
Otherwise the "DIGITAL ICE" option in the next step will be dimmed and will not
be available for selection.
9. To repair creases, tears, and other
surface defects from your photo,
choose the DIGITAL ICE option
that works best for you in the
Settings window. Select from
Normal or Strong.
Note: DIGITAL ICE Photo Print Technology is designed to work with
continuous-tone reflective originals such as photos. It is not designed to work
with slides, negatives, transparencies, and printed matter.
10. If the colors in your photo are
faded and need restoring,
check the "Automatic Color
Restoration" box in the
Settings window.