Positioning Electrophoresis Gels; Using The Leak-Free Glass Holder - Microtek Bio-5000 Manual

Positioning Electrophoresis Gels

This procedure applies when you use the lower scan bed of the Bio-5000 to scan the
electrophoresis gels.

Using the Leak-Free Glass Holder

1. Place the electrophoresis gel to be scanned on top of the glass surface of the
2. Insert the holder all the way into the transparency bay (lower compartment) of the
6 Bio-5000 Supplement
Leak-Free Glass Holder.
scanner. Make sure the holder is inserted correct side up.
Keep calibration strip clear
and free of any obstruction