Omron M7 Intelli IT Instruction Manual page 28

3. Using Your Monitor without a Smart Device
After your monitor has detected your blood pressure and
pulse rate, the cuff automatically deflates. Your blood
pressure and pulse rate are displayed with the previous
reading.
If either the systolic or the diastolic reading is high (refer to
sub-section 1.3), the "
3. Press the [START/STOP] button to turn your
monitor off.
Note
• Your monitor automatically turns off after 2 minutes.
• Wait 2 - 3 minutes between measurements. The wait time
allows the arteries to decompress and return to their
pre-measurement state. You may need to increase the wait
time depending on your individual physiological
characteristics.
EN27
START
INFLATING
" symbol appears.
COMPLETED