Using the Guest Mode
Your monitor stores readings for 2 users in the memory. The guest
mode can be used to take a single measurement for another user.
Note
•No readings are stored in the memory, and the Afib mode is not
available when the guest mode is selected.
1. While holding the
press the [START/STOP] button.
The user ID symbol and the date/time display
will not be shown.
2. Release the
The arm cuff automatically starts to inflate.
If your systolic pressure is more than 210 mmHg
If your systolic pressure is more than 210 mmHg, take a
measurement manually.
After the arm cuff starts to inflate, press and hold the [START/STOP]
button until the monitor inflates 30 to 40 mmHg higher than your
expected systolic pressure.
Note
•Do not inflate above 299 mmHg.
Caution
• Inflating to a higher pressure than necessary may result in bruising of the arm
where the cuff is applied.
3. Using Your Monitor without a Smart Device
button down,
and [START/STOP] buttons.
EN
EN30