If the irregular heartbeat continues to appear, we recommend you to
consult with and follow the directions of your physician.
Indication for Use
This product can be used for monitoring blood pressure and pulse
rate in order to confirm e.g. medication efficacy or lifestyle
improvement programs. The product can be used for trending of
these parameters in general home situation.
Contraindications for Use
The product should not be used in case the cuff location is damaged
by trauma or if other treatment interferes with proper use. This
product should not be used on patients on which it causes high
anxiety as the results will not reflect the actual user's blood pressure
values.
DO NOT apply the arm cuff on your arm while on an intravenous drip
or blood transfusion.
DO NOT use this monitor on infants, toddlers, children or persons
who cannot express themselves.
Side Effects
•DO NOT take measurements more often than necessary because
bruising, due to blood flow interference, may occur.
•Inflating to a higher pressure than necessary may result in bruising
of the arm where the cuff is applied.
•Stop using this monitor and consult with your physician if you
experience skin irritation or discomfort.
Minor Repairs
Besides replacement of depleted batteries (where applicable) and
re-fitting with approved accessories (mentioned in Instruction manual)
due to wear and tear, no further minor repairs are to be carried out on
the main product. If a defect occurs, consult your OMRON retail outlet
or distributor as mentioned on the packaging.
Before the First Use
Remove this monitor from the packaging and inspect for damage. If
this monitor is damaged, DO NOT USE and consult with your
OMRON retail outlet or distributor.
Introduction
EN
EN4
Need help?
Do you have a question about the M7 Intelli IT and is the answer not in the manual?
Questions and answers
как синхронизировать время аппарата с приложением omron connect
To synchronize the time on the Omron M7 device with the Omron Connect app:
1. Press the "Transfer" or "Bluetooth" button on the monitor once to enter transfer mode. Four small flashing squares will appear on the monitor.
2. Open the Omron Connect app on your mobile device.
3. Tap the Sync icon on the app dashboard to manually sync the monitor with the app.
If auto-sync is enabled in the app, the synchronization will happen automatically.
This answer is automatically generated