Suzuki DF 2.5 Service Manual page 51

4-6 FUEL SYSTEM
INSTALLATION
Installation is reverse order of removal with the special attention
to the following steps.

Do not re-use the removed gasket. Always use a new
gasket.
• Tighten the carburetor mounting bolts to the specified torque.
 Carburetor mounting bolt: 10 N·m (1.0 kg-m, 7.0 lb-ft)
Throttle control cable installation and adjustment
1. Fully close the throttle control grip.
2. Turn the idle adjusting screw 1 counterclockwise until the
screw do not touch the stopper plate 2.
3. Insert the throttle control inner cable 3 into the linkage hole.
4. While pulling the cable 3, tighten the screw 4 in order to
secure the cable.
5. Adjust the idle speed. (See page 2-11 and 2-12.)