WATER PUMP AND RELATED ITEMS
• Under panel gasket 1 into position.
• Apply SUZUKI BOND "1207B" to under panel gasket.
NOTE:
Apply both side sealant evenly/without irregularity.
99000-31140: SUZUKI BOND "1207B"
• Install the under panel 2.
• Install the impeller pin 3.
• Install the impeller 4.
• Apply SUZUKI BOND "1207B" onto the outer-surface of water
pump sleeve 5.
99000-31140: SUZUKI BOND "1207B"
• Install the water pump sleeve into the water pump case 6 by
confirming the boss on the sleeve should be meeting with the
groove on the pump case.
• Install the water pump case seal 7.
• Apply the Water Resistant Grease to the O-ring 8.
• Install the O-ring 8.
99000-25161: SUZUKI WATER RESISTANT GREASE
LOWER UNIT 8-15