Suzuki DF 2.5 Service Manual page 120

7-14 MID UNIT
• Install the tiller handle washers 4 and the handle pivot bolt
5.
• Apply the Thread Lock to the handle pivot bolt.
 99000-32050: THREAD LOCK "1342"
• Tighten the tiller handle pivot bolt 5 to the specified torque.
 Tiller handle pivot bolt: 17 N·m (1.7 kg-m, 12.5 lb-ft)
• Install the throttle cable 6 to the throttle cable holder 8.
• Install the throttle cable 6 to the carburetor 7.
• Check that the throttle control is smoothly operated from the
full closed position to the full opened position.
• Install the choke rod connector 0 to the carburetor 7.
• Install the choke rod 9 to the choke rod connector 0.
• Check that the choke control is smoothly operated from the
full closed position to the opened position.