8-14 LOWER UNIT
PROPELLER SHAFT COMPONENTS
• Install the circlip 1 to the propeller shaft 2.
• Insert the return spring 3 and the clutch dog 4 to the propel-
ler shaft 2.
• Insert push rod 5 into the propeller shaft 2.
Propeller shaft assy/bearing housing
• Insert the thrust washer 2 and the bearing housing 3 to the
propeller shaft 1.
• Apply the Water Resistant Grease to the O-ring 4 and the oil
seals of the bearing housing.
99000-25161: SUZUKI WATER RESISTANT GREASE
• Install the propeller shaft/housing assembly to the gearcase
and tighten the two bolts to the specified torque.
Propeller shaft bearing housing bolt:
8 N·m (0.8 kg-m, 6.0 lb-ft)