Suzuki DF 2.5 Service Manual page 49

4-4 FUEL SYSTEM
INSTALLATION
Installation is reverse order of removal with the special attention
to the following steps.

Do not re-use the removed gasket. Always use a new
gasket.
• Tighten the carburetor mounting bolts to the specified torque.
 Carburetor mounting bolt: 10 N·m (1.0 kg-m, 7.0 lb-ft)
Throttle control cable installation and adjustment
(See page 4-6.)
CHECK FOR FUEL LEAKAGE
1. Twist the air-vent screw 1 on the fuel tank cap counter-
clockwise to open the vent.
2. Turn the fuel cock lever "ON" position.
3. Check the fuel line for leaks.