Icom IC-7100 Service Manual Addendum page 236

4-5 TRANSMIT ADJUSTMENTS (HF/50 MHz/70 MHz BANDS)
Starts the transmit adjustment.
Reterns to the adjustment screen.
1) Set or modify the adjustment value as specifi ed by rotating [MAIN DIAL].
2) Push [SET] to store the value.
ADJUSTMENT ITEM
PREPARATION
[HF/50/70M BAND] Push [MENU] to enter the Transmit adjustment menu.
TX TOTAL GAIN
1 • Display: "Total Gain HF"
ADJUSTMENT
2 • Display: "Total Gain HF2"
3 • Display: "Total Gain HF1"
4 • Display: "Total Gain HF3"
5 • Display: "Total Gain 50M"
6 • Display: "Total Gain 70M"
TX POWER & POWER 1 • Display: "POWER HF"
METER SETTING
2 • Display: "POWER HF Min"
3 • Display: "POWER HF 10%"
4 • Display: "POWER HF Tuner"
5 • Display: "POWER HF 50%"
6 • Display: "POWER HF 100%"
*; Stop transmitting.
TRANSCEIVER'S CONDITION
–
• Transmit continues
• Transmit continues
• Transmit continues
• Transmit continues
• Transmit continues
• Transmit continues
• Transmit continues
Stores the value and move to the next item.
SET
OPERATION
• Connect the AG and millivoltmeter to
[MIC], and then set it as;
Frequency : 1.5 kHz
Level : 30 mVrms
• Connect a power meter to [ANT1].
–
• Push [SET]. (Automatically starts to
transmit.)
–
4-5
ADJUST
VALUE
POINT
– Push [NB].
– Push [SET].
(Automatically starts
to transmit.)
[MAIN DIAL] 50 W
Push [SET]*.
– Push [SET].
(Automatically starts to
transmit.
A beep sounds, and
then another beeps
sound 3 sec. later.*)
Push [SET].
(Automatically starts to
transmit.
A beep sounds, and
then another beeps
sound 3 sec. later)
[MAIN DIAL] 50 W
Push [SET].
25 W
Push [SET]*.
– –
[MAIN DIAL] 2 W
Push [SET].
10 W
Push [SET].
10 W
Push [SET].
50 W
Push [SET].
105 W
Push [SET]*.