Owner's Manual; User Settings - Teeter FitSpine XT1 Assembly Instructions Manual

FIGURE 21
FIGURE 21a
Before Inverting
Ensure Owner's Manual is Attached
The Owner's Manual contains important information on how to use
your Teeter Inversion Table, including how to personalize the user
settings, properly secure and release the Ankle Lock System, and test
and adjust the rotation control.
• If not already attached, thread the provided metal chain through
the pre-punched hole in the upper corner of the Owner's Manual.
• Secure the chain to the A-Frame through the designated hole in the
Hinge Plate (Figure 21 & 21a). Allow the Owner's Manual to hang freely
on the outside of the A-Frame Spreader Arms so it doesn't interfere
with the rotation of the Table Bed.
IMPORTANT: Once attached to the A-Frame, DO NOT remove the
Owner's Manual. It should remain permanently attached to your
inversion table to serve as a reference for all users in regards to proper
adjustment and use of the equipment.
Read the Owner's Manual thoroughly before using your
Teeter Inversion Table. Improper settings could result
Watch the Getting Started Videos
The Getting Started Video Portal is a helpful supplement to the
Owner's Manual, with easy-to-follow instructions on user settings,
how to invert, storage and maintenance, and even stretching and
exercises you can do with your Teeter. Just go to teeter.com/videos
to access them now!
The X2 is shown here. Your actual model may vary.
WARNING
!
in serious injury or death!
13