Configure E-Mail Settings For The System Administrative Account - Cisco MARS Install And Setup Manual

Completing the Configuration using MARS web interface
Figure 5-5
In the Primary, Secondary, and Tertiary DNS address fields, enter any DNS addresses necessary.
Step 3
In the Search Domain field, enter the domain and click Add.
Step 4
Click Update to save your changes.
Step 5
If the DNS configuration is changed from the web interface, you must perform a pnstop and then a
Note
pnstart operation for the new DNS information to be used by the MARS Appliance. For information on
performing these two operations, see
Appliance Services via the Console, page

Configure E-mail Settings for the System Administrative Account

One of the required settings for MARS is the e-mail address for the system administrative account,
pnadmin. The MARS Appliance uses this e-mail address to deliver import notifications and reports about
system status.
To specify the e-mail address for the system administrative account, follow these steps:
Select Management > User Management.
Step 1
Select the check box next to Administrator (pnadmin), and click Edit.
Step 2
Result: The User page appears.
Install and Setup Guide for Cisco Security MARS
5-16
Domain Name Server Information
Stop Appliance Services via the Console, page 6-5
6-5.
Chapter 5 Initial MARS Appliance Configuration
and Start
OL-14672-01