Pnstatus - Cisco MARS Install And Setup Manual

pnstatus

pnstatus
To show the status of each module running as part of the MARS application from the serial console, use
the pnstatus command.
Note For a description of the processes and services, see
All services should be running on a Local Controller. However, a Global Controller only has four
services running: autoupdate, graphgen, pnarchiver, and superV—all other services are stopped.
Syntax Description
This command has no arguments or keywords.
Examples
The following command shows the status of each module of the MARS application running on the
appliance:
[pnadmin]$ pnstatus
Module State
DbIncidentLoaderSrvRUNNING01:12:18
KeywordQuerySrvRUNNING01:12:18
autoupdateRUNNING01:12:18
csdam
csiosipsRUNNING01:12:18
csips
cswin
device_monitorRUNNING01:12:18
discoverRUNNING01:12:18
graphgenRUNNING01:12:18
pnarchiverRUNNING01:12:18
pndbpurgerRUNNING01:12:18
pnesloaderRUNNING01:12:18
pnmac
pnparserRUNNING01:12:19
process_event_srvRUNNING01:12:19
process_inlinerep_srvRUNNING01:12:19
process_postfire_srvRUNNING01:12:19
process_query_srvRUNNING01:12:19
superV RUNNING 01:12:20
Install and Setup Guide for Cisco Security MARS
A-48
pnstatus
Uptime
RUNNING 01:12:18
RUNNING 01:12:18
RUNNING 01:12:18
RUNNING 01:12:18
Appendix A
List of Backend Services and Processes, page
Command Reference
B-11.
OL-14672-01