Syslogrelay List - Cisco MARS Install And Setup Manual

syslogrelay list

syslogrelay list
To display the IP addresses of the reporting devices to which the Local Controller forwards the syslog
messages as well as the IP address of the collector to which they are sent, use the syslogrelay list
command.
There are no arguments or keywords for this command.
Command History Release
4.3.1
5.3.1
Syntax Description -h
all
collector
src
Usage Guidelines Using the syslogrelay list command, you can verify the list of addresses in the include and exclude lists.
If a reporting device device appears in the include list, the Local Controller forwards any syslog
messages that it receives from that device to the syslog collector. The exclude list identifies the IP
addresses for which the Local Controller does not forward the syslog messages. The collector identifies
the IP address to which the specified syslog messages are forwarded. This address represents a syslog
server or other collector as defined in RFC 3164: The BSD syslog Protocol.
If the collector address is not set, the syslogrelay feature is disabled.
Examples The following example displays the t syslog relay configuration.
[pnadmin]$ syslogrelay list all
[Collector]
192.168.1.1
[Inclusions]
ANY
[Exclusions]
192.168.2.1
182.168.3.1
Related Commands
Install and Setup Guide for Cisco Security MARS
A-74
syslogrelay list [all | collector | src]
Modification
This command was introduced in the 4.X release train.
This command was introduced in the 5.X release train.
Displays usage guidelines
(default) Displays the IP address of the collector and the union of those
sources on the include list and exclude list.
Displays the IP address of the collector, or destination, of the forwarded
messages.
Displays the IP addresses of the sources on the include list and exclude list.
Appendix A Command Reference
OL-14672-01