Cisco MARS Install And Setup Manual page 90

Completing the Configuration using MARS web interface
To provision the license on 5.x software, follow these steps:
Locate the Software License Claim Certificate document that came with your product.
Step 1
Following the instructions on the claim certificate, log on to the specified website, and obtain the license
Step 2
authorization key/file. The Product Authorization Key (PAK) number found on the Software License
Claim Certificate is required for the registration process. After registering, retain the document for
future reference.
Once you have stored the file on your local computer, verify the file has a .lic extension. If not, rename
Step 3
the file to have that extension. MARS prevents you from uploading a file with a different extension.
Open your web browser and enter one of the following URL syntaxes in the address bar:
Step 4
https://<machine_name>/
•
https://<ip_address>/
•
where machine_name is the name of the appliance as defined in
page 5-9, and ip_address is the address assigned to the interface to which you are attempting to connect
(either eth0 or eth1), as configured in
page 5-7, or
You will be prompted to accept the security certificate before you can proceed. After you accept the
certificate, the login page appears.
Note SSL only works with the Cisco Systems self-signed certificates.
Note You will be prompted to install the Adobe SVG control if not previously installed.
Figure 5-1
When you see the login page, enter the system administrative account (pnadmin) and the password as
Step 5
defined in either
System Administrative Account, page
Select Local from the Type list because pnadmin is the local system administrative account, and click
Step 6
Login.
Install and Setup Guide for Cisco Security MARS
5-12
Specify the IP address and Default Gateway for the Eth0 Interface,
Specify the IP Address and Default Gateway for the Eth1 Interface, page
MARS Login Page
Establishing a Console Connection, page
5-6.
Chapter 5 Initial MARS Appliance Configuration
Specify the Appliance Hostname,
5-4, or Change the Default Password of the
5-8.
OL-14672-01