Cisco MARS Install And Setup Manual page 36

MARS 110R, 110, 210, GC2R, and GC2 Front and Back Panels
The USB ports on the front and back panels are not supported.
Note
To maintain the proper air pressure within the system, all hard drive bays must be populated with either
Note
a hard drive, or a drive blank.
Control Panel Description—MARS 110R, 110, 210, GC2R, and GC2
The standard control panel supports several push buttons and status LEDs.
and functions of the control panel. The Universal Serial Bus (USB) port is not supported.
Figure 1-13
1
3
5
Install and Setup Guide for Cisco Security MARS
1-18
Control Panel Elements—MARS 110R, 110, 210, GC2R, and GC2
1 2 3 4
1
2
12
NIC 2 activity LED
Power on/off button—Toggles the system
power on and off. Use for hard power-downs
when a software shut down cannot
be performed.
Hard drive activity LED
5 6 7
!
ID
11 10
2
4 Power LED
6 System status LED
Chapter 1 Appliance Overview and Specifications
Figure 1-13
8
9
NIC 1 activity LED
shows the layout
OL-14672-01