MOTO GUZZI V7 Manual page 67

Instrument panel configuration
By keeping the "MODE button pressed while the TOTAL ODOMETER is displayed,
the advanced functions menu can be accessed. By shortly pressing the "MODE" but-
ton, the next item will be accessed, which can be selected by keeping the same button
pressed.
The advanced functions available in the menu are the following:
1) Clock setting (CLOCK SET)
2) Pairing request (if the MIA ECU is present)
02_53
3) Pairing reset (if the MIA ECU is present)
4) Gear shift indicator threshold (SET GEAR SHIFT)
5) Change odometer unit of measurement (SELECT UNIT (mi/Km))
6) Change consumption indicator unit of measurement (SELECT UNIT (US mpg - IMP
mpg - L/100 - Km/L))
7) Change thermometer unit of measurement (SET UNIT °F - °C)
02_54
Gear Shift "gear shift indicator threshold"
This mode allows setting the minimum "GS L" value and the "GS H" value of the
gearshift threshold. It is possible to switch from minimum to maximum by keeping the
"MODE" button pressed.
By pressing the "MODE" button shortly, the rmp value increases by 100 rpm at a time;
once the maximum value is reached, it restarts from the initial value. The operation is
completed by keeping the "MODE" button pressed to save the set value set and the
set-up menu page will be displayed.
•
GS L: 4,500 rpm (run-in revolutions)
02_55
•
GS H: 7200 rotations/min (rpm) (maximum number of rotations admitted by
the ECU)
67