MOTO GUZZI V7 Manual page 141

BULB LAYOUT
The headlamp unit contains the following bulbs:
•
one high beam / low beam bulb (1) (upper);
•
one tail light bulb (2) (lower);
FRONT HEADLAMP BULB REPLACEMENT
•
Rest the vehicle on its stand.
•
Remove the complete parabola from the headlight body by undoing the screw
(3).
04_17
Low/high beam light bulb
•
Pull out the electrical connection to the bulb (4), and disconnect it from the
bulb.
•
Move hood (5) manually.
•
Release the two ends of the retaining spring (6) located on the bulb holder.
•
Pull the bulb (1) out of its seat.
•
Install a bulb of the same type adequately.
NOTE
INSERT THE BULB INTO THE BULB HOLDER, MAKING SURE THE REFERENCE
04_18
FITTINGS MATCH.
Daytime running light bulb
•
Pull out the tail light bulb holder (7) from its seat.
•
Remove the bulb (2) and replace it with another of the same type.
•
Check the proper insertion of the bulb in the bulb holder.
04_19
141