Chapter 1: About This Guide; Environment Information; Related Documentation - SpectraLink IP-DECT Server 200 Interoperability Manual

Chapter 1: About This Guide

This guide describes how to configure a Spectralink IP-DECT Server 200/400/6500 or a
Virtual IP-DECT Server One for connecting to the Dstny Gateway.
In the following the servers will be referred to as "Spectralink IP-DECT Server".
This guide is intended for qualified technicians and the reader is assumed to have a basic
knowledge about the Spectralink IP-DECT Server and Dstny. It is also assumed, that you
have an installed and functioning Spectralink IP-DECT Server.
The guide is divided into two parts:
Dstny
•
Spectralink IP-DECT Server
•
Each part describes the general configuration and the user administration.

Environment Information

Dstny – https://www.dstny.com/.
•
Spectralink IP-DECT Server 200/400/6500 (must have firmware version PCS 22BA
•
or newer).
Spectralink Virtual IP-DECT Server One (must have firmware PCS 22BA or newer).
•
Spectralink DECT Handsets 72x2, 75x2, 76x2, 77x2 (must have firmware PCS 22BA
•
or newer).
Spectralink network and security requirements - see description of communication
•
ports for the relevant server in the Server Installation and Configuration Guide.

Related Documentation

All Dstny technical configuration and system administration documents are available at
https://mizone.telepo.com/home.
All Spectralink documents are available at http://support.spectralink.com/.
Spectralink Documentation
Subject
Spectralink DECT Handsets
Site Survey Function in Handset
722-0223-000 Rev: A
November 2023
Documentation
For more information about the handset, refer to the user
guide available online at
http://support.spectralink.com/products.
For more information about the site survey function in
handset, refer to the guide available online at
http://support.spectralink.com/products.
4