Ring Tone - Grandstream Networks GAC2570 User Manual

Enable Auto Record
When Call Established
Rejected Call
Notification
Return Code When
Refusing Incoming Call
Return Code When
Enable DND

Ring Tone

Auto Config CPT by
Region
Call Progress Tones:
• Dial Tone
• Second Dial Tone
• Ringback Tone
• Busy Tone
• Reorder Tone
the UCM server to request for recording, and the recording function will
be executed by the server.
• If set to "Record on Broadsoft", then will send the recording feature
code to the Broadsoft server to request for recording, and the recording
function will be executed by the server.
If set to "Disable", recording functionality will be disabled during calls.
Configures whether to auto record a call. If enabled, all recordings will start
automatically after the call is established. The default setting is No.
Specify whether to enable rejected call notification. Once enabled, a
missed call will prompt on LCD when reject the incoming call.
When refusing the incoming call, the GAC2570 will send the selected type
of SIP message of the call. Available options are:
•
Busy(486)
•
Temporarily Unavailable(480)
•
Not Found(404)
•
Decline(603)
Default is Busy(486).
When DND is enabled, the GAC2570 will send the selected type of SIP
Message in reply to an incoming call (INVITE).
•
Busy(486)
•
Temporarily Unavailable(480)
•
Not Found(404)
•
Decline(603)
Default is Busy(486).
Configures whether to choose Call Progress Tone automatically by region.
If set to "Yes", the device will configure CPT (Call Progress Tone)
according to different regions automatically. If set to "No", you can
manually configure CPT parameters. The default setting is "No".
Configures tone frequencies according to user preference. By default, the
tones are set to North American frequencies. Frequencies should be
configured with known values to avoid uncomfortable high pitch sounds.
•
Syntax: f1=val,f2=val [,c=on1/off1[-on2/off2[-on3/off3]]];
(Frequencies are in Hz and cadence on and off are in 10ms)
ON is the period of ringing ("On time" in "ms") while OFF is the period of
GAC2570 User Manual
Version 1.0.1.23
P a g e | 149