Table of Contents
Advertisement
Connected
Disconnected
DND On
DND Off
On Hold
Unhold
Log On
Log Off
Register
Unregister
App Page Definitions
Programmable Key
Programmable Key
Format
Display Format
Show Display Name
from Server
BLF
Key Mode
Configures the event URL when a call is established.
Configures the event URL when a call is disconnected.
Configures the event URL when the DND feature is enabled on the
device.
Configures the event URL when the DND feature is disabled on the
device.
Configures the event URL when Hold key is pressed to hold the call.
Configures the event URL when Hold key is pressed to unhold the call.
Configures the event URL when users log on the device successfully.
Configures the event URL when users log off the device.
Configures the event URL when an account in the device is registered
successfully.
Configures the event URL when an account in the device is unregistered.
Configures the display format for the MPK. Users could select "Name",
"User ID", "Name, User ID" or "Name, User ID, Key mod".
"Name" is the one saved in GAC2570 contacts.
The default setting is "Name, User ID, Key mode".
If selected, the display name on the server will replace the name users
configured.
The key modes are:
•
Speed Dial: Press to dial the UserID when the accounts being
configured as VPK.
•
Busy Lamp Field: Monitor the UserID status when the accounts
being configured as VPK.
•
Call Intercom: Intercom/paging to the UserID when the accounts
being configured as VPK.
•
Speed Dial via Active Account: Similar to Speed Dial but it will dial
GAC2570 User Manual
Version 1.0.1.23
P a g e
|
168
Advertisement
Table of Contents
