1 General Control Scheme Flowchart
Sections 3-2 to 3-6 on the following pages detail when each of the controls in the flowchart below is activated.
Stop operation
Abnormal shutdown
System stops
A unit stops when the load demanded decreases
Startup control
Compressor startup delay control
Startup control for cooling operation
Normal operation control
Component control during normal operation
Compressor output control
Compressor step control
Operation priority and rotation of compressors
Electronic expansion valve control
Outdoor fan control
Protection control
High pressure protection control
Low pressure protection control
Discharge temperature protection control
Compressor and inverter module protection
control
Thermo on
2
3
Thermo on
4
Conditions met
for oil return
5
25
Special control
Outdoor unit duty cycling
Oil return operation
Legend
Numbers in the top right-hand
corners of boxes indicate the
relevant section of text on the
following pages.
6