Updating The Camera With Configtool - Dahua ITC952-AU3F-L User Manual

After initializing cameras in batches, you can easily go to the camera login page by clicking
on the ConfigTool page. See Figure 5-11. In this case, you do not need to enter the IP
address of each camera when login.
Step 2 Enter the IP address of the Camera in the browser address bar, and press the Enter key.
Step 3 Enter username and password on the displayed page, and then click Login.
● A box pops up when the username or password is incorrect. See Figure 5-10.
● If you enter invalid username or password for five times, the account will be locked for
five minutes.

5.3 Updating the Camera with ConfigTool

The ConfigTool supports updating the cameras one by one or in batches.
Figure 5-10 Invalid username or password
Figure 5-11 Devices found page
23
User's Manual