Installation; Mobile Camera Installation (1); Adhesive Installation Scheme - Dahua DH-HACHMW3200L-FR User Manual

3 Installation

Caution:

Please install the device in time after it is taken apart, which is to avoid the camera
module being exposed to damp environment for too long.

Before the installation, please make sure the installation surface is thick enough to sustain
at least 3X weight of the camera.

For the installation mode of side outlet, make sure the direction of side outlet is in
accordance with that of the installation position map when sticking the installation position
map. Besides, pull the cable through the pedestal cable slot before locking the screw.

The installation figures below are for reference only.

3.1 Mobile Camera Installation (1)

The installation location for this type of mobile camera includes vehicle operating platform,
vehicle trail or it can also be hang-mounted on the ceiling inside the vehicle.
3.1.1 3M Adhesive Installation Scheme
Step 1
Take out the 3M adhesive ② from the device accessory bag and stick it on the camera chassis
(cable led out from side).
Step 2
Paste the camera onto the mounting surface ① according to the monitoring location of the
camera ③。
Step 3
Connect device cable to the back-end HCVR device.
Step 4
Adjust lens angle to proper monitoring location after it displays image on the back-end coding
device, which is shown in Figure 3-2.
Figure 3-1
5